Mold Star 20T
Product Code:SOSMS20TG
A platinum cured silicone, soft, tear resistant, which exhibits very low long term shrinkage. Molds made with Mold Star 20T will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Features relatively low viscosity and vacuum degassing is not required for most applications. Has been tested and certified skin safe by an independent laboratory.
Can be thickened with Thi-Vex thickener for brush-on application. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Can be thickened with Thi-Vex thickener for brush-on application. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Technical Data Sheet
Mixing Ratio: 1A:1B by Volume
Viscosity: 11 000 cps
Pot Life: 6 Minutes
Demold Time: 30 Minutes
Shore A Hardness: 20A
Color: Translucent
Weight:
Pint: 2 lb
Gallon: 16 lb
5 Gallons: 80 lb
- Quantity Available: 4
- Availability: In stock